TPMS Help
07-25-2013, 06:36 PM
Relearn Code: TOY-1
Relearn Procedures: Initialization following rotation and tire replacement.
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off)
3. If TPMS telltale is flashing, hold down tire pressure reset button (located on instrument panel, knee bolster, or inside glove box) until telltale goes off.
4. Once TPMS telltale is off, hold down tire pressure reset button until TPMS telltale flashes 3 times.
5. Drive vehicle at 19mph or more for over an hour to complete initialization.
* A properly formatted scan tool required to learn new sensor IDs when replacing sensors.
** Vehicle may be equipped with Main/2nd switch located at base of driver side knee bolster, underneath glove box, or inside glove box. Sensor IDs must be written to the position the switch is pressed.
Relearn Procedures: Initialization following rotation and tire replacement.
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off)
3. If TPMS telltale is flashing, hold down tire pressure reset button (located on instrument panel, knee bolster, or inside glove box) until telltale goes off.
4. Once TPMS telltale is off, hold down tire pressure reset button until TPMS telltale flashes 3 times.
5. Drive vehicle at 19mph or more for over an hour to complete initialization.
* A properly formatted scan tool required to learn new sensor IDs when replacing sensors.
** Vehicle may be equipped with Main/2nd switch located at base of driver side knee bolster, underneath glove box, or inside glove box. Sensor IDs must be written to the position the switch is pressed.