tpms support
07-25-2013, 10:53 PM
GM-14
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition switch to the ON position (engine off).
3. Press the RESET button on the DIC to clear any warning messages.
4. Press and release the OPTIONS button on the DIC until the display is blank.
5. Press and hold the RESET button on the DIC for 3 seconds.
6. Press and release the OPTIONS button again until the message TIRE TRAINING is displayed.
7. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
8. After horn chirp has sounded, proceed as in step 6 for the next three sensors in the following orderL RF, RR, LR.
9. Turn the ignition switch to the OFF position to exit the relearn mode.
1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition switch to the ON position (engine off).
3. Press the RESET button on the DIC to clear any warning messages.
4. Press and release the OPTIONS button on the DIC until the display is blank.
5. Press and hold the RESET button on the DIC for 3 seconds.
6. Press and release the OPTIONS button again until the message TIRE TRAINING is displayed.
7. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
8. After horn chirp has sounded, proceed as in step 6 for the next three sensors in the following orderL RF, RR, LR.
9. Turn the ignition switch to the OFF position to exit the relearn mode.