tpms support
08-05-2013, 09:34 PM
FRD-3
Inflate all tires to the pressure listed on tire placard.
For models without message center:
1. Press and hold odometer reset button until TIRE PRESSURE SET is displayed.
2. Hold button for 3 more seconds.
3. TPMS telltale will begin to blink to signal completion of reset process.
For models with message center:
1. Press and hold SETUP button until RESET FOR SYSTEM CHECK is displayed.
2. Press and hold RESET button until HOLD RESET TO RELEARN is displayed.
3. Press and hold RESET for 3 seconds.
4. TPMS telltale and HOLD RESET TO RELEARN message will blink 3 times to signal completion of reset process.
Inflate all tires to the pressure listed on tire placard.
For models without message center:
1. Press and hold odometer reset button until TIRE PRESSURE SET is displayed.
2. Hold button for 3 more seconds.
3. TPMS telltale will begin to blink to signal completion of reset process.
For models with message center:
1. Press and hold SETUP button until RESET FOR SYSTEM CHECK is displayed.
2. Press and hold RESET button until HOLD RESET TO RELEARN is displayed.
3. Press and hold RESET for 3 seconds.
4. TPMS telltale and HOLD RESET TO RELEARN message will blink 3 times to signal completion of reset process.