TPMS Help
08-01-2018, 10:07 PM
OBD II Relearn :
Inflate all tires to pressure indicated on tire placard
Read all sensors using a properly formatted TPMS scan tool starting at the LF tire and moving clock wise to the RF, RR, and ending with LR
Turn ignition to ON position (Engine off)
Connect TPMS tool to OBD II port using OBD II cable
* If your Toyota/Lexus vehicle is unable to accept new serial numbers, see notes on “Toyota Lock Mode”
Following on tool prompts, continue through process until the tool indicates relearn success.
*Some vehicles will need to be driven
*Do not turn your vehicle off during this process
Drive vehicle until the TPMS light goes off indicating completion of process (Time and distance varies by vehicle)
Inflate all tires to pressure indicated on tire placard
Read all sensors using a properly formatted TPMS scan tool starting at the LF tire and moving clock wise to the RF, RR, and ending with LR
Turn ignition to ON position (Engine off)
Connect TPMS tool to OBD II port using OBD II cable
* If your Toyota/Lexus vehicle is unable to accept new serial numbers, see notes on “Toyota Lock Mode”
Following on tool prompts, continue through process until the tool indicates relearn success.
*Some vehicles will need to be driven
*Do not turn your vehicle off during this process
Drive vehicle until the TPMS light goes off indicating completion of process (Time and distance varies by vehicle)