Admin@TheTPMSForum
10-11-2021, 05:49 PM
The new Chevrolet C8 Corvette has been rumored to be an auto relearn vehicle however there have been reported instances of the vehicle not picking up new sensors, in this case there is a manual relearn process that can be used. A few things to check prior, are all tires at exact door placard psi? I s the other set out of range of the vehicle? Have you attempted a relearn in the reset menu which is not in the same DIC directory as the TPMS pressures display?
The manual process requires a GM trigger tool as seen here:
https://www.tpms.com/EL-50448-TPMS-Activation-Reset-Trigger-Tool-p/el50448.htm
https://cdn3.volusion.com/vfpzc.jmvkr/v/vspfiles/photos/EL50448-2T.jpg?v-cache=1592392371
Go to the DIC menu for TPMS reset using the steering wheel navigator wheel, Enter reset, press on brake for 5 seconds until horn signals, then trigger first sensor DF with tool, continue to PF, PR, DR then car will signal completion with 2 honks.
See video:
https://youtu.be/BUJMmkxlwGI
The manual process requires a GM trigger tool as seen here:
https://www.tpms.com/EL-50448-TPMS-Activation-Reset-Trigger-Tool-p/el50448.htm
https://cdn3.volusion.com/vfpzc.jmvkr/v/vspfiles/photos/EL50448-2T.jpg?v-cache=1592392371
Go to the DIC menu for TPMS reset using the steering wheel navigator wheel, Enter reset, press on brake for 5 seconds until horn signals, then trigger first sensor DF with tool, continue to PF, PR, DR then car will signal completion with 2 honks.
See video:
https://youtu.be/BUJMmkxlwGI