Admin@TheTPMSForum
06-07-2022, 04:41 PM
1. Make sure all tires are inflated to the vehicle?s recommended inflation pressures (found in
the owner?s manual on the door placard).
2. Turn the Ignition key to the ACCESSORY position and apply the parking brake.
3. At the same time, press the LOCK and UNLOCK buttons on the keyless entry remote for
several seconds.
4. The horn should sound letting you know that the vehicle has entered into TPMS re-learn
mode.
5. Place the trigger tools antenna against the driver?s side front tire?s sidewall aimed at the valve
stem location.
6. Hold down the left button on the trigger tool until the horn sounds.
7. The horn sound lets you know that the vehicle just registered that sensor.
8. You can now move on to the passenger side front tire.
9. Once again, place the trigger tool against the tire?s sidewall at the valve stem location and hold
down the left button.
10. Once the horn sounds you can move on to the passenger side rear tire and finish with the
driver side rear tire.
11. Once the driver side rear tire is registered, the vehicle?s horn should sound twice to note
that the re-learn procedure is complete.
12. You can now turn the vehicle off.
the owner?s manual on the door placard).
2. Turn the Ignition key to the ACCESSORY position and apply the parking brake.
3. At the same time, press the LOCK and UNLOCK buttons on the keyless entry remote for
several seconds.
4. The horn should sound letting you know that the vehicle has entered into TPMS re-learn
mode.
5. Place the trigger tools antenna against the driver?s side front tire?s sidewall aimed at the valve
stem location.
6. Hold down the left button on the trigger tool until the horn sounds.
7. The horn sound lets you know that the vehicle just registered that sensor.
8. You can now move on to the passenger side front tire.
9. Once again, place the trigger tool against the tire?s sidewall at the valve stem location and hold
down the left button.
10. Once the horn sounds you can move on to the passenger side rear tire and finish with the
driver side rear tire.
11. Once the driver side rear tire is registered, the vehicle?s horn should sound twice to note
that the re-learn procedure is complete.
12. You can now turn the vehicle off.