View Full Version : Resetting Mercedes TPMS
KenTheTPMSMan
12-12-2012, 08:10 PM
This thread is to discuss resetting Mercedes TPMS.
KenTheTPMSMan
01-16-2013, 10:15 PM
Mercedes Benz has 3 styles of reset procedures for their vehicles:
Type 1:
-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press forward/back button on steering wheel until trip and odometer are being shown.
-Press up/down until tire pressure monitor is displayed.
-Press + button, TIRE PRESS. MONITOR-ACTIVATED!-PRESS. Displays after driving a few minutes.
-If REACTIVE-TIRE PRESS. MONITOR appears then repeat process.
-If TIRE PRESS.-CHECK TIRES appears then tire pressure is too low and needs to be inflated.
To relearn new sensors ID's car must be driven 10 mins at over 15 mph.
KenTheTPMSMan
01-16-2013, 10:18 PM
Type 2:
-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press UP/DOWN button (on side of steering wheel) until TIRE PRESSURE MONITOR CONNECTED REACTIVATION USING + is displayed
-Press + button, TIRE PRES. NOW OK? is displayed.
-Press + button, TIRE PRESSURE MONITOR REACTIVATED is displayed.
KenTheTPMSMan
01-16-2013, 10:20 PM
Type 3:
-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press UP/DOWN button (on side of steering wheel) until RUN FLAT TIRE INDICATOR ACTIVE. REACTIVATION POSS.: + is displayed
-Press + button, TIRE PRES. NOW OK? is displayed.
-Press + button, RUN FLAT INDICATOR REACTIVATED is displayed.
AndresS500
01-30-2013, 05:58 AM
Thanks for the info. Saved me a trip to the dealer.
Allen@TheTPMSForum
12-14-2016, 08:54 PM
Here is a link on how to reset Mercedes TPMS http://www.tpmsrelearn.com/2016/12/05/mercedes-3/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.